For queries :  ☎ 1800 123 8611
  • Home
  • FirePro Technology
 

FirePro Technology

FirePro Technology

We design and manufacture modular, efficient and effective
fire suppression systems with an innovative compound
at the core of our technology.

FPC Compound

FirePro systems use the latest generation of our patented FPC solid compound that is the pinnacle of many years of research and development. When activated the FPC solid compound is transformed into a rapidly expanding extremely effective and efficient fire extinguishing condensed aerosol.

The aerosol is propagated and evenly distributed in the enclosure under protection using the momentum generated during the transformation process. Unlike gaseous agents, the total flooding effect is achieved without increasing the pressure in the protected area/volume. Fire extinguishing is accomplished by the interruption of the chemical chain reactions occurring in the flame and not by the depletion of oxygen and/or cooling as suggested by the traditional triangle of fire.

 FirePro technology extinguishes fire by
inhibiting the chemical chain reactions
in the flame on a molecular level,
without depleting oxygen!

The FirePro Advantage

Conventional fire extinguishing agents extinguish fire by one or a combination
of the following three methods:

Cooling : By absorbing heat from the fire and lowering its temperature.

Starvation : By reducing or cutting-off the fuel supply.

Smothering : By removing oxygen or reducing it below a certain level.

Transformation Process

In a typical fire, there is intensive inter-reaction between atoms and fragments of unstable free radicals in the presence of oxygen. This continues until the burning fuel is depleted. FirePro extinguishes fire predominantly by inhibiting on a molecular level the chemical chain reactions present in combustion. On activation of the FirePro unit, the FPC compound within is transformed into a rapidly expanding fire extinguishing condensed aerosol consisting mainly of Potassium salt-based K2CO3, H2O (vapor), N2 and CO2. The gas-type, 3-D, properties of the condensed aerosol facilitate its even and fast distribution in the protected volume as well as its flow into the natural convection currents of combustion.

The solid particles of Potassium salts, which are of a few microns in size, are suspended in an inert gas that displays an extremely high surface to reaction mass ratio - a fact that increases efficiency - which results in less quantities of fire extinguishing agent required. When the condensed aerosol reaches and reacts with the flame, Potassium radicals (K*) are formed mainly from the disassociation of K2CO3. The K*s bind to other flame free radicals (hydroxyls - OH-) forming stable products such as KOH. This action extinguishes fire without depleting the ambient oxygen content. KOH reacts further in the presence of CO2 and forms K2CO3. The solid particles of Potassium Carbonate (K2CO3) have a diameter of less than five microns and remain in suspension in the protected room/enclosure for at least 30 minutes, preventing further re-ignition of the fire.

The FPC solid compound, developed after many years of Research & Development, utilizes environmentally friendly, naturally occurring Potassium salts with no pyrotechnic materials involved. Our dedication to sustainability is attested by the number and quality of EU and International Certificates, Listings and Approvals attained.

Frequently Asked Questions (FAQ)

FirePro are non-pressurized stand-alone modular stand-alone units containing the patented FPC compound. Various metal components and high purity ceramic based cooling materials are complete the inner mechanism of these best-fit-for-the-purpose firefighting units.

The patented fire extinguishing compound (FPC) it’s stable and non-pyrotechnic

Furthermore, it has a certified life cycle and shelf life of 15 years

  • The aerosol phase consists mainly of: Potassium Carbonate (K2CO3) - Water vapor (H2O) - Nitrogen (N2) - Carbon Dioxide (CO2).
  • The solid particles of Potassium Carbonate (K2CO3) have a diameter of less than five microns and remain in suspension in the protected room/enclosure for at least 30 minutes
  • Non-corrosive
  • Non-toxic
  • Non-conductive
  • Environment friendly
  • Highly efficient and effective fire suppressant
  • Fully automatic activation system
  • Electrical, thermal and manual activation modes
  • Self-activation of FPC compound at 300°C
  • Modular
  • Easily transported
  • Easy installation even as a retrofit application
  • No distribution piping, manifold or nozzles required
  • No system pressurization or room integrity tests required
  • Negligible maintenance cost compared to other technologies
  • Easily connected to existing conventional fire detection and activation systems
  • Non pressurised containers can be near or even in fire without the hazard of exploding
  • Tremendous space and weight saving with no floor space or shoring up for weight required
  • A range of operating temperatures ranging from -50o C to +50o C and with humidity of up to 98%
  • Can offer total flooding protection and restrict fire at its source without the need to discharge a total flooding system.

Can they be used in Emergencies? 

  • FirePro HERO units with manual activation are light, easily handled and can be rolled/thrown in the fire from a safe distance. They are ideal for Fire Brigades and First Responders.

The FirePro fire extinguishing condensed aerosol technology is suitable for Fire Classes A, B, C & F (according to EN2 Classification) and A, B & C (according to NFPA10 Classification).

EN Designation

en_21

Save

NFPA Designation

nfpa_2

Save

TOP